Jump to content


Dana 44 Help


  • Please log in to reply
9 replies to this topic

#1 Simple'72CJ

Simple'72CJ

    Advanced Member

  • Members
  • PipPipPip
  • 153 posts
  • LocationEllensburg, Wa

Posted 06 August 2016 - 09:43 AM

So my inner wheel bearing let go and ruined my spindle and locking hub.  Trying to get everything back together by next weekend and need to order a new spindle, but being I didn't build the front I'm trying to figure out which spindle to order.  The stub shaft is a a 30 spline and leaning towards a late 70's full size bronco spindle? Just needing some reassurance before ordering.

#2 Simple'72CJ

Simple'72CJ

    Advanced Member

  • Members
  • PipPipPip
  • 153 posts
  • LocationEllensburg, Wa

Posted 06 August 2016 - 10:33 AM

All dimensions were pulled using a steel rule so very approximate

Posted Image

#3 Simple'72CJ

Simple'72CJ

    Advanced Member

  • Members
  • PipPipPip
  • 153 posts
  • LocationEllensburg, Wa

Posted 06 August 2016 - 10:55 AM

Did more research and sounds like its either a Warn dana 30 30 spline outer specialty spindle or you can take a standard dana 30 and bore it to fit a 30 spline stub?

#4 Jay W

Jay W

    Advanced Member

  • Members
  • PipPipPip
  • 1,529 posts
  • LocationYakima, WA

Posted 06 August 2016 - 11:04 AM

What are the diameters on the spindle? Is the 30 spline shaft 1.5" od?

#5 Simple'72CJ

Simple'72CJ

    Advanced Member

  • Members
  • PipPipPip
  • 153 posts
  • LocationEllensburg, Wa

Posted 06 August 2016 - 11:21 AM

OD of shaft is 1 1/4"
The smallest OD on the spindle is about 1 5/8"

Edited by Simple'72CJ, 06 August 2016 - 11:30 AM.


#6 Simple'72CJ

Simple'72CJ

    Advanced Member

  • Members
  • PipPipPip
  • 153 posts
  • LocationEllensburg, Wa

Posted 06 August 2016 - 11:29 AM

OD of shaft is 1 1/4"
Smallest OD - 1 39/64 -- 1.6094"
Middle OD - 1 23/32 -- 1.7188"
Large OD - 1 49/64 -- 1.7656"

Don't have a pair of calipers

#7 Jay W

Jay W

    Advanced Member

  • Members
  • PipPipPip
  • 1,529 posts
  • LocationYakima, WA

Posted 06 August 2016 - 11:35 AM

Probably 1 5/16, standard 30 spline od

#8 Simple'72CJ

Simple'72CJ

    Advanced Member

  • Members
  • PipPipPip
  • 153 posts
  • LocationEllensburg, Wa

Posted 06 August 2016 - 11:39 AM

Correct, just changed my measuring method

#9 Jay W

Jay W

    Advanced Member

  • Members
  • PipPipPip
  • 1,529 posts
  • LocationYakima, WA

Posted 06 August 2016 - 12:00 PM

I could bore spindles for you if you don't have access to a machine shop before next weekend.

#10 Drunk Prom Date

Drunk Prom Date

    Advanced Member

  • Members
  • PipPipPip
  • 657 posts
  • LocationYakima, wa

Posted 28 October 2016 - 04:22 PM

I have a diff for sale.... 😬


Sent from my iPhone using Tapatalk